Micro-Drill Kit


Features: Cordless operation with rechargeable battery Light-weight design Excellent balance and handling No special tools needed to change burrs The Ideal Micro-Drill is designed for research applications that require surgical burrs and trephines. The drill is constructed of light-weight aluminum alloy for balance and control and is powered by a rechargeable 6-volt nickel-metal hydride (NiMH) battery. The drill is shipped in a hard plastic case with die-cut foam for convenient storage. A fully discharged battery can be charged in about 3 hours. Under normal operating conditions and with intermittent use, the drill will work for up to 8 hours between charges. The drill will run for approximately 45 minutes if it is operated continuously. Charge the drill before prolonged periods of work to avoid losing power. The battery should last for 1000 charging cycles. The Ideal Micro-Drill can be used with burrs that have a 2.33mm shaft diameter. No tools are necessary to change burrs. Simply push the burr in to install. Pull the burr out with fine plyers or strong hemostats to remove them from the drill. Be sure to hold the shaft and not the head of the burr to avoid damaging the burr. The drill is shipped with a set of 5 round burrs: 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 1.6 mm. If you already know what burr size will work best for you, it is a good idea to order replacements along with the drill. See the burrs available from Roboz below. The Ideal Micro-Drill can be used with the Kopf model 900 small animal stereotaxic manipulator and the 1466-B stereotaxic handpiece holder. The outside diameter of our drill is 3/4" (19.5 mm). Other stereotaxic stands and adapters accommodating this size may also be used. The Ideal Micro-Drill is covered by a one year warranty. Specifications: · Length (Without Burr) 17.5 cm · Diameter 1.9 cm · Charger input 100-240 V · No Load Speed 12,000 rpm · Stall Torque 1.25 oz./in. · Battery 6V 300 mAh NiMH rechargeable battery

Request A Catalog