Clearance  Items | Products | Home   Bnr10.gif (1005 bytes)    

MicroTherma 2T 

Accepts Type T thermocouples
±0.2°C meter accuracy
Self-calibrating circuitry
Includes Hold, Max and Min functions
Switchable °C or °F
The MicroTherma 2T is compact, easy-to-operate and reliable. A New version of the popular MicroTherma Series makes use of a unique line of high-precision type T thermocouples. The combined result gives you the best accuracy available in handheld thermocouple measurements. Self-diagnostic recalibration takes place each time the meter is powered on. Every time you check the calibration of the MicroTherma against an external standard, you’ll find it within spec – no adjustments required. Each MicroTherma includes a traceable cal certificate with actual test data. Although the precision thermocouples provide the best possible accuracy for interchangeable probes, the MicroTherma also allows a “system-cal” adjustment to offset any probe errors. Choose probes from our broad line of type T thermocouples.
Model Dimension Price
TW2-193 Microtherma 2 Type "T" Thermometer $175.00/Each Click Here To Add To Your Shopping Cart!
TW2-205 Protective PVC Boot $16.50/Each Click Here To Add To Your Shopping Cart!
TW2-300 Waterproof Pouch, K $40.00/Each Click Here To Add To Your Shopping Cart!
TW2-302 Waterproof Pouch, T $40.00/Each Click Here To Add To Your Shopping Cart!
TW2-100 Small Attache Case, fits 1-2 probes $27.00/Each Click Here To Add To Your Shopping Cart!
TW2-200 Medium Attache Case, fits 1-4 probes $46.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Thermalert Monitoring Thermometer
 
bullet Large Digital Display - Reads to 1/10°C in clinical
 range 25-45°C
bullet High Stability - No calibration necessary
bullet Safety - Low voltage battery operation
bullet Long Battery Life - 1200 hours

 

This economical, easy to use thermometer is intended for
continuous monitoring in the laboratory. The digital display
reads to 1/10°C.  For safety, the unit is battery operated and
batteries will last for 1200 hours.  In the lab: TH-5 is used with any fast reading microprobes and special animal probes.  For example, RET-2 is a rectal probe for rats; IT series flexible microprobes can be used for tissue implantation, measurement of small volume liquid samples, rectal temperatures in baby mice, etc.; MT-D is a fast-reading surface microprobe.  For lab applications where strip chart recording is needed, the TH-5 can be supplied with analog output.


Specifications

Temperature Range: 25 to 45°C
Resolution:
 
0.1°C
Instrument Accuracy: 
0.1°C ± 1 digit
Calibration: 
Conforms to National Bureau of Standards tables. Monograph 125
Readout:
1/2" liquid crystal
Batteries: 
Four "C" cells
Battery Life:
 
1200 hours continuous
 
Model Dimension Price
TH-5 Thermalert Monitoring Thermometer $535.00/Each Click Here To Add To Your Shopping Cart!
TH-5A Thermalert Monitoring Thermometer with analog output $585.00/Each Click Here To Add To Your Shopping Cart!
TTS-4 Thermalert Stand $25.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Animal Rectal Probes       


                  
Model Dimension Price
RET-1 Rectal probe for neonatal, rabbits, and larger animals. Flexible, vinyl covered, soft tipped. Does not cause discomfort. Max. Temp. 90°C. Time constant 5.0 secs. 5 ft. lead. Isolated. $80.00/Each Click Here To Add To Your Shopping Cart!
RET-2 Rectal probe for rats. For fast intermittent measurements. Smooth ball tip. Stainless steel shaft - 1 " long, 0.59" dia., tip dia. .125". 5 ft. lead. Max Temp. 125°C. Time constant 0.8 secs. Not Isolated. $95.00/Each Click Here To Add To Your Shopping Cart!
RET-3 Rectal probe for mice, etc. As RET-2, with shaft 3/4" long. .028" dia. Tip diameter .065". Time constant 0.5 secs. Not Isolated.
 
$100.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart

The new RET-2-ISO for rats has all the same features of the RET-2 plus:

bullet an isolated sensor (can be used with montoring equipment where electrical interference from other electrodes may be present.
bullet Reinforced strain relief for applications where probe is in more frequent use. Smooth ball tip. Stainless steel shaft - 1” long, .059” dia. Tip diameter .125”. 5 foot lead length. Time constant 0.8 secs.

The new RET-3-ISO for mice and neonatal rats has all the same features of the RET-3 plus:

bullet an isolated sensor (can be used with monitoring equipment where electrical interference from other electrodes may be present).
bullet Reinforced strain relief for applications where probe is in more frequent use.
bullet Smooth ball tip. Stainless steel - 3/4” long, .028” dia. Tip diameter .065”. 5 foot lead length. Time constant 0.5 secs.
 

The new RET-4 Rectal probe for very small animals (neonatal mice). Flexible polyurethane sheath with smooth rounded tip (see inset). 36” long (can be made longer). Outside diameter nominal 0.032” (max at tip 0.04”). Time constant 0.18 seconds. Max temp. 140°C. May be sterilized by Gas (ETO), Gluteraldehyde solution or autoclave.

 

Model Dimension Price
RET-2-ISO Rectal probe for rats w/isolated sensor $105.00/Each Click Here To Add To Your Shopping Cart!
RET-3-ISO Rectal probe for mice and neonatal rats w/isolated sensor $110.00/Each Click Here To Add To Your Shopping Cart!
RET-4 Rectal probe for very small animals (neonatal mice) $80.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Flexible Implantable Probes

IT Series - Implantable in semi-solids and tissue with needle (supplied). Also for immersion in various solutions and rectal temperatures of small animals. Totally sheathed in chemical resistant Teflon. Quite rugged. Max Temp. 150°C. Isolated. Type # designates needle gauge. (Or one gauge smaller in thin wall)
 

Model Dimension Price
IT-14 .050" diameter, constant 0.3 seconds, 3ft lead length $95.00/Each Click Here To Add To Your Shopping Cart!
IT-18 .025" diameter, constant 0.1 seconds, 3ft lead length $95.00/Each Click Here To Add To Your Shopping Cart!
IT-21 .016" diameter, constant 0.08 seconds, 1ft lead length $100.00/Each Click Here To Add To Your Shopping Cart!
IT-23 For ultra fast measurements and for use on micro-size specimens. Sensor lead only 0.009" dia. Tissue implantable with 23ga. needle (supplied). Rather fragile. Max. temp. 150°C. Time constant 0.005 secs. 3 ft. lead. Teflon® coated. Isolated. $100.00/Each Click Here To Add To Your Shopping Cart!
IT-1E As IT-18 but sensor bead exposed. Combines the ultra-fast response of IT-23 with the Teflon®sheath strength of IT-18. Time constant .005 seconds Isolated. $110.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart

IT-24P - Tiny, 24 gauge polyurethane coated wire with polyester insulated thermocouple bead. For research applications to measure temperature in animal brains and other tissue. Fairly fragile, but very fast responding.  Wire cross section .005” x .0025” Insulated tip maximum outside diameter .009”. Length 36” supplied on 1” diameter protective spool as shown. Time constant .004 seconds. Maximum temperature 70°C. Sterilization by Gas (ETO).

IT-24P Tiny, 24 gauge polyurethane coated wire with polyester insulated thermocouple bead. For research applications to measure temperature in animal brains and other tissue. $75.00/Each Click Here To Add To Your Shopping Cart!

Other sizes available email for listing

Go to Cart

Probe Wipes
 
bullet Help meet HACCP
bullet Broad spectrum bactericides
bullet Ideal way to sanitize and cleanse thermometer probes

Effective against a wide range of bacteria including "Listeria" and "Salmonella." Each wipe is pre-saturated with a broad spectrum anti-bacterial solution that is odorless and does not taint food. Single sachets are handy to carry and can be used by simply puncturing with your probe and running it back and forth. Mini tubs easily fit in a pocket or drawer. Large tubs are economical and can be mounted close to the point of usage.
Model Description

Price

836-200 Sachet, 6" x 7.5" wipe, carton of 100 wipes $20.00/Each Click Here To Add To Your Shopping Cart!
836-022 Mini Tub, 2.75" x 5" wipe, single tub of 70 wipes $8.00/Each Click Here To Add To Your Shopping Cart!
836-052 Large Tub, 5" x 5" wipe, single tub of 200 wipes $13.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Temperature Controller

bullet Controls heating blankets,
heat lamps or heating pad
bullet Can be used for both heating
and cooling applications
bullet 110 to 230v AC line operation
bullet Control Range of -100 to
+400
oC
bullet Resolution 0.1oC
The new TCAT-2 general purpose PID Autotuning Controller provides accurate temperature control in a variety of laboratory applications. Combined with a heat lamp or heating pad, the TCAT-2 may be used to maintain the body temperature of anesthetized animals during surgery or stereotaxic procedures. Small animal cages are easily warmed with a heat lamp. The TCAT-2 may also be used in cooling applications, such as to control independent perfusate cooling systems.

Realizing that laboratory applications are diverse, TCAT-2 Controller is provided in several versions. The model specified depends on whether a laboratory has a general or specific need for the controller.
 
Model Dimension Price
TCAT-2AC This version controls only AC powered heating or cooling devices such as a heat lamp. $915.00/Each Click Here To Add To Your Shopping Cart!
TCAT-LV This model provides a low voltage DC output for electrically sensitive applications where AC frequencies might interfere with other monitoring devices. It comes
standard with a built in DC power.
$1,010.00/Each Click Here To Add To Your Shopping Cart!
TCAT-2DF This is a combination version which includes both an AC outlet for controlling primarily resistance loads such as heat lamps, AC powered warming blankets and a low-voltage, low noise” DC output for heating pads. This version allows you to control a variety of different loads. $1,135.00/Each Click Here To Add To Your Shopping Cart!
All TCAT-2 versions may be used with any of our extensive line of accurate Type T thermocouple probes, which act as the temperature feedback sensor.  Most commonly used are the RET series of animal rectal probes, but the IT series of implantable flexible probes and MT series of needle probes (call for details) may also be used depending on the specific application. All instruments are designed to operate on a 110V or 230V AC supply.
Go to Cart

Heat Lamp
Optional infrared heat lamp is table mounted with a standard “u” screw clamp that expands to fit tables up to 2.25” deep. An 18” adjustable swing arm provides easy adjustment of radiant heat to specimen. The lamp is supplied with a 250w (infrared) heat lamp bulb and a built in reflector. A chrome bulb guard is also provided and easily snaps onto the lamp housing after the bulb is installed. Fits standard 110v AC socket. Power: 10 watts.
 
Model Dimension Price
HL1 Heat Lamp $315.00/Each Click Here To Add To Your Shopping Cart!
HL1-BULB Heat Lamp Bulb $85.00/Each Click Here To Add To Your Shopping Cart!
HP Heat Plate 4" W x .025" H x 6" L $315.00/Each Click Here To Add To Your Shopping Cart!

Clearance  Items | Products | Home
 

 

 

 Please note, Shopping cart does not work with Safari or FireFox
We apologize for any inconvenience this may cause

©2001 Braintree Scientific, Inc. Address: PO Box 361 Braintree, MA 02185
Phone: 781-348-0768 
FAX: 781-843-7932

e-mail: Info@braintreesci.com

Prices Subject to Change without Notice
Prices are Valid for U.S. Customers Only

Copyright ©2001 Braintree Scientific, Inc. . All rights reserved. No portion of this Web site should be copied.
This web-site was last updated 12/11/2009