Operating Boards & Surgical Tables
 
Bnr10.gif (1005 bytes)
Deltaphase® Operating Board

This compact operating board takes advantage of the Deltaphase® principle to maintain animal body temperature during surgical or experimental procedures. An eight and one half inch square stainless steel operating surface lies in contact with an activated Deltaphase® isothermal pad.
The underside of the pad is insulated to provide a longer isothermal period. Molded wells are provided for sponges, instruments and anesthetic apparatus. The board is functional, durable, and easy to clean. Its low cost and safety make it appropriate for use in student laboratories. The unit is supplied with two Deltaphase® pads.
 
Model Description Price
39OP Deltaphase® Operating Board (includes 2 pads/2 insulators) $105.00/Set Click Here To Add To Your Shopping Cart!
39DP Deltaphase®  Pads (kit of 3 pads/3 insulators) $90.00/3/kit Click Here To Add To Your Shopping Cart!

Go to Cart


CD+ Labs Small Animal Surgery System

bullet Eliminates the need for an assistant
bullet Reduces setup and procedure time
bullet Provides superior control
bullet Improves visualization

The Small Animal Surgery System sets a new standard of procedural control.  The fully integrated procedural and stabilization system provides precisely controlled retraction at the operative site.  The CD+ Labs System allows researchers to operate independently; eliminating the need for an assistant or improvised assistive devices.  The system removes the complexities and distractions of improvised set-ups, allowing the researcher to focus full attention on the surgical procedure.

Animal tables are made of ferro-magnetic steel and incorporate a window for compatibility with body temperature maintenance systems.  

Fixators hold retractors.  They contain rare earth magnets that attach anywhere on the animal table.  A puch-button top operates multi-level locking jaws that grip wire or elastomers firmly.  They can be adjusted linearly or rotationally with finger-tip release.  Complete depression of the push-button allows for insertion of the wire or elastomer while partial depression of the push-button allows for adjustment.  Fixators can also lock onto other lab components that require stabilization in the surgical setting, such as neurological or rectal probes or anesthesia delivery systems.  The magnetic field is well controller within the fixator to minimize interference with sensitive instrumentation.  In fact, at a distance of jast a few centimeters the effects of these small put powerful magnets are completely masked by Earth’s ever present magnet field.

Retractor wires are formed from light, flexible stainless steel.  This simple approach produces an economical instrument that performs its job with minimal clutter, while providing superb control and feel.  Retractor wires can be used on their own to retract or manipulate tissue, or fitted to provide a wide range of retractor styles.  Retractor wires engage and lock into the fixator jaws at the desired elevation allowing both linear and rotational adjustment over the entire length of the wire.  One end of the wire is formed in a loop to provide grip for a gloved hand, and the business end is formed into a right angle hook that can retract on its own or lock to a range of retractor tips.  The wires can also be re-formed to create restraints or engage other lab apparatus that need to be secured in the surgical field.  Wires are available in 10 and 14cm lengths for mouse and rat procedures.  Retractor tip widths range from 1mm to 7.5mm, plus a single point, sharp tissue hook.  Each tip can be locked onto a wire for static retraction or affixed to an elastomer to form a dynamic retractor.

Model Description Price
ACD-014 Small Animal Set (Mouse) $315.00/Each Click Here To Add To Your Shopping Cart!
ACD-015 Medium Animal Set (Rat) $410.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


 

Tail Vein Injection Platform
The quickest and easiest restraint for tail vein injections.
Simply pull mouse tail through the slot and make your injection!
 
bullet Non-grip surface.
bullet Wide opening for easy access.                                                                  
bullet Open slot for easy cleaning! Feces and Urine easily washed away.

      
Model Description

Price

IL-300

Tail Vein Injection Platform $115.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


 

Tail Snipping Platform For isolating DNA from transgenic
animals for genotyping.


Simply pull mouse tail through the slot, measure and collect your tip in the vial. Micro Tube Holder: Collect your tail tip directly in the pre-labeled tube preventing DNA cross contamination. Measuring Ruler (mm): Accurately measure tail length for cutting. Enhances IACUC compliance. Cleaning Slot: Feces and Urine are easily washed out with stream of water (minimizes cross contamination).                                
                                                                                                                                        
 
Model Description

Price

IL-200

Tail Snipping Platform

$125.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Surgery and Micro Tattooing Platform

Can be used for surgery, micro manipulations, general micro-utility platform (i.e. organ inspections, dissections, etc.).
 
bullet Flex arm, non-obstructive rimless magnifying glass (main lens: 2.3 X, inset lens: 4.0 X).
bullet Non-skid feet for added stability.
bullet Universal input power supply (100-240 VAC, 50-60 Hz).
                                                                                                                                  
Surgery Platform
                                                                                                                                           
bullet Two Flexible LED lights - provides direct illumination,
no shadows and no heat.
bullet Limb restraints
bullet Size: 9" x 13.5"

 
Model Description

Price

ASS7

Surgery Platform $475.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart

                                                                                                                                 
Micro Tattooing platform
                                                                                                                                          
bullet One Flexible LED light - provides direct illumination with no
heat.
bullet Cup holders (1.5 ml).
bullet Size: 6" x 9"

 
Model Description

Price

NTS01

Micro Tattooing platform

$375.00/Each Click Here To Add To Your Shopping Cart!
 

Rodent WorkStand

The Rodent WorkStand has been developed in collaboration with George A Vogler, D.V.M., DACLAM of Saint Louis University Medical School Department of Comparative Medicine for the express purpose of facilitating various procedures required of today's laboratory technicians. The Rodent WorkStand is designed to support rats, mice and similar small rodents in a stable and comfortable position for the technician during endotracheal intubation and intratracheal dose instillation and other similar procedures.
 
Model Dimension

Price

RW-A3467 Rodent WorkStand $532.00/Each Click Here To Add To Your Shopping Cart!

Go to Cart


Rodent Intubation Stand

Constructed from durable polycarbonate, this platform provides the perfect stage for intubating mice and rats up to 300 grams.  A larger stand for rats 300+ grams is coming soon.

The animal is suspended from the incisor wire on the angled side of the stand. Three mounting positions are available to customize the placement of the animal on the stand in order to meet the user's needs.  Two sets of posts are provided with each stand for installation of the incisor wire and the optional head positioning wire. Each post has three positions for the height adjustment to optimally accommodate the user and the animal. Each post is also fitted with a slit for securing the end of the wire making the wire easy to install and easier to remove.

The stand is constructed from a single piece of polycarbonate plastic with a seamless design. The top of the stand provides a hand rest for stabilization during intubation that is designed to support significant weight. The compact seamless design and its construction from durable polycarbonate make this stand easy to clean and will not crack with the use of harsh cleaning agents as is common with similar stands constructed from acrylic.

The simple nature of this device in comparison to other intubation stands that pivot and hinge with the aid of numerous moving parts and hard to clean crevices significantly reduces the learning curve of achieving consistent, successful intubations which directly translates into increased productivity. Competitively priced, this product offers a significant advantage to similar products by providing a simple but durable stand that is easy to clean, store, and move to any location.
 
Model Dimension Price
RIS-100 Rodent Intubation Stand (300g) $240.00/Each Click Here To Add To Your Shopping Cart!
RIS-200 Large Rodent Intubation Stand (400-500g) $255.00/Each Click Here To Add To Your Shopping Cart!

 

©2001 Braintree Scientific, Inc. Address: PO Box 361 Braintree, MA 02185
Phone: 781-348-0768 
FAX: 781-843-7932

e-mail: Info@braintreesci.com

Prices Subject to Change without Notice
Prices are Valid for U.S. Customers Only

All rights reserved. No portion of this Web site should be copied.
This web-site was last updated 10/21/2008